@comment{{Database of the Glasgow University Centre for Systems and Control}}
@comment{{Abreviations for Journals }}
@comment{{Shortcuts for Institutions }}
@comment{{Shortcuts for Report Type }}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1967 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1968 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1970 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1971 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1972 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1973 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1974 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1975 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1976 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1977 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1978 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1979 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1980 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1981 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1982 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1983 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1984 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1985 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1986 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1987 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1988 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1989 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1990 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1991 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1992 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1993 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1994 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1995 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{Gaw95c,
title = {Physical model-based control: A bond graph approach},
journal = {Journal of the Franklin Institute},
volume = {332},
number = {3},
pages = {285-305},
year = {1995},
issn = {0016-0032},
doi = {10.1016/0016-0032(95)00044-5},
author = {Peter J. Gawthrop},
abstract = {A bond graph representation of model-based observer control is introduced and shown to provide a convenient framework for the design of controllers in the physical domain. The approach is illustrated by a series of examples and the robustness of the method is investigated by simulation.}
}
@article{RobBalGaw95,
title = {Design and implementation of a bond-graph observer for robot control},
journal = {Control Engineering Practice},
volume = 3,
number = 10,
pages = {1447-1457},
year = 1995,
issn = {0967-0661},
doi = {10.1016/0967-0661(95)00148-N},
author = {D.W. Roberts and D.J. Ballance and P.J. Gawthrop},
keywords = {Robots, modelling, bond graphs, state estimation, position control},
abstract = {In robotics, high-precision measurements of link positions are available for feedback control but tachometer measurements of link velocities are often severely contaminated by noise. This paper presents the use of a bond-graph model-based nonlinear observer to estimate the velocities in the control of an experimental two-link manipulator. A significant advantage of this approach is that the observer software may be written automatically from the bond-graph observer representation. Results are presented in simulation form, and for practical implementation on the experimental arm.}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1996 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{GawJonSba96,
title = {Emulator-based control and internal model control: Complementary approaches to robust control design},
journal = {Automatica},
volume = {32},
number = {8},
pages = {1223-1227},
year = {1996},
issn = {0005-1098},
doi = {10/0005-1098(96)00059-3},
author = {Peter J. Gawthrop and Richard W. Jones and Daniel G. Sbarbaro},
keywords = {Control system analysis, internal model control},
abstract = {Two alternative approaches to controller design, the internal model control (IMC) of Morari and Zafiriou [Morari, M. and E. Zafiriou (1989). Robust Process Control. Prentice Hall, Englewood Cliffs, NJ] and the emulator-based control (EBC) of Gawthrop [Gawthrop, P. J. (1987). Continuous-time Self-tuning Control. Vol. 1: Design, Engineering Control Series. Research Studies Press, Lechworth, U.K.] (based on the generalized minimum variance control of Clarke and Gawthrop [Clarke, D. W. and P. J. Gawthrop (1975). Self-tuning controller. Proc. IEE, 122(9), 929–934. Clarke, D. W. and P. J. Gawthrop (1979). Self-tuning control. Proc. IEE, 126(6), 640–6333. Gawthrop, P. J. (1977). Some interpretations of the self-tuning controller. Proc. IEE, 124(10), 889–894]) are shown to differ only superficially in approach and notation. This result provides a link between robust control based on IMC and adaptive control based on EBC.}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1997 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{CosGaw97,
title = {Physical-Model Based Control: Experiments with a Stirred-Tank Heater},
journal = {Chemical Engineering Research and Design},
volume = 75,
number = 3,
pages = {361-370},
year = 1997,
note = {Particle Processing},
issn = {0263-8762},
doi = {10.1205/026387697523679},
author = {D.J. Costello and P.J. Gawthrop},
keywords = {state estimation, model-based control, partially-known systems},
abstract = {In the pursuit of generic methods, control theory has become separated from its prime objective: the control of physical systems. These generic techniques have a wide range of applications yet do not easily allow inclusion of system specific information into the control design. There are two important categories for which the inclusion of system-specific information is important: partially-known systems and non-linear systems. Physical-Model Based Control (PMBC) is a novel approach to using such system-specific information. The objective of this paper is to demonstrate the experimental application of PMBC to a partiallyknown nonlinear system. In so doing, the performance of the PMBC method is evaluated, and it is demonstrated how process and control engineering insights can be combined within this PMBC framework to yield a novel system-specific control algorithm.}
}
@article{GawBal97,
author = {Peter J. Gawthrop and Donald J. Ballance},
cscauthor = {pjg,djb},
title = {Symbolic Algebra and Physical-Model-Based Control},
journal = {Computing and Control Journal},
volume = 8,
number = 2,
month = {April},
pages = {70-76},
issn = {0956-3385},
year = 1997,
abstract = {In order to achieve the best possible control of a
particular system, it is clear that as much information
about the system as possible should be used when designing
the controller. This leads to a controller specifically
tailored to the system being controlled. Unfortunately, this
is expensive in terms of design time and expertise, and a
number of approaches have been suggested to overcome this
problem. The approach taken by physical-model-based control
is to model the system in a generic manner and then
automatically design the controller based on this
model. This process requires symbolic algebra to enable the
controller to be designed},
pdf = {PAPER_PATH/GawBal97.pdf}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1998 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 1999 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{NgwGaw99,
author = {Roger F Ngwompo and Peter J Gawthrop},
cscauthor = {pjg},
title = {Bond Graph Based Simulation of Nonlinear Inverse Systems
Using Physical Performance Specifications},
journal = {Journal of the Franklin Institute},
year = 1999,
month = {November},
volume = 336,
number = 8,
pages = {1225--1247},
abstract = {Analysis and simulation of non-linear inverse systems
are sometimes necessary in the design of control systems particularly
when trying to determine an input control required to achieve some
predefined output specifications. But unlike physical systems which
are proper, the inverse systems are very often improper leading to
numerical problems in simulation as their models sometimes have a high
index when written in the form of differential-algebraic equations
(DAE). This paper provides an alternative approach whereby performance
specifications and the physical system are combined within a single
bond graph leading to a greatly simplified simulation problem.},
pdf = {PAPER_PATH/NgwGaw99.pdf},
doi = {10.1016/S0016-0032(99)00032-0}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2000 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{GawRon00b,
author = {Peter J. Gawthrop and Eric Ronco},
cscauthors = {pjg},
title = {Estimation and Control of Mechatronic Systems
Using Sensitivity Bond Graphs},
journal = {Control Engineering Practice},
year = 2000,
volume = 8,
number = 11,
month = {November},
pages = {1237--1248},
abstract = { A new bond graph framework for sensitivity theory is
applied to model-based predictive control, state estimation, and
parameter estimation in the context of physical systems. The
approach is illustrated using a nonlinear mechatronic system.},
pdf = {PAPER_PATH/GawRon00b.pdf},
doi = {10.1016/S0967-0661(00)00062-9}
}
@article{Gaw00d,
author = {Peter J Gawthrop},
title = {Physical Interpretation of Inverse Dynamics
using Bicausal Bond Graphs},
journal = {Journal of the Franklin Institute},
year = 2000,
volume = 337,
number = 6,
pages = {743-769},
abstract = {A physical interpretation of the inverse dynamics of
linear and nonlinear systems is given in terms of the bond graph of
the inverse system. It is argued that this interpretation yields
physical insight to guide the control engineer.
Examples are drawn from both robotic and process systems.},
pdf = {PAPER_PATH/Gaw00d.pdf},
doi = {10.1016/S0016-0032(00)00051-X}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2001 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2002 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2003 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2004 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{Gaw04,
class = {Bond-graph},
author = {Peter J Gawthrop},
title = {Bond Graph Based Control Using Virtual Actuators},
journal = {Proceedings of the Institution of Mechanical Engineers
Pt. I: Journal of Systems and Control Engineering},
month = {September},
year = 2004,
volume = 218,
number = 4,
pages = {251--268},
abstract = { A bond-graph based approach to design in the physical
domain is described which uses the concept of virtual actuators
and virtual sensors.
The approach is illustrated by, and implemented on, an
experimental ball and beam system},
pdf = {PAPER_PATH/Gaw04.pdf},
doi = {10.1243/0959651041165864}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2005 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{Gaw05,
author = {Peter J Gawthrop},
title = {Virtual Actuators with Virtual Sensors},
journal = {Proceedings of the Institution of Mechanical Engineers
Pt. I: Journal of Systems and Control Engineering},
year = 2005,
volume = 219,
number = 5,
pages = {371 -- 377},
month = {August},
abstract = {The virtual actuator approach to bond graph based
control is extended to use virtual sensor
inputs. This allows relative degree conditions on the
controller to be relaxed. Furthermore, the effect of
the transfer system can be eliminated from the closed
loop system. Illustrative examples are given.},
doi = {10.1243/095965105X33473}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2006 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{VinBalGaw06,
author = {D. Vink and D. Ballance and P. Gawthrop},
title = {Bond graphs in model matching control},
journal = {Mathematical and Computer Modelling of Dynamical Systems},
year = 2006,
volume = 12,
number = {2-3},
pages = {249 - 261},
doi = {10.1080/13873950500068278},
abstract = {
Bond graphs are primarily used in the network modeling of lumped
parameter physical systems, but controller design with this graphical
technique is relatively unexplored. It is shown that bond graphs can
be used as a tool for certain model matching control designs. Some
basic facts on the nonlinear model matching problem are recalled. The
model matching problem is then associated with a particular
disturbance decoupling problem, and it is demonstrated that bicausal
assignment methods for bond graphs can be applied to solve the
disturbance decoupling problem as to meet the model matching
objective. The adopted bond graph approach is presented through a
detailed example, which shows that the obtained controller induces
port-Hamiltonian error dynamics. As a result, the closed loop system
has an associated standard bond graph representation, thereby
rendering energy shaping and damping injection possible from within a
graphical context.
}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2007 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{GawWagNei07,
author = {P.J. Gawthrop and D.J. Wagg and S.A. Neild},
title = {Bond Graph Based Control and Substructuring},
journal = {Simulation Modelling Practice and Theory},
year = 2009,
volume = {17},
number = {1},
pages = {211-227},
month = {January},
note = {Available online 19 November 2007},
doi = {10.1016/j.simpat.2007.10.005},
abstract = {A bond graph framework giving a unified treatment of both physical
model based control and hybrid experimental-numerical simulation
(also known as real-time dynamic substructuring) is presented. The
framework consists of two subsystems, one physical and one
numerical, connected by a \emph{transfer system} representing
non-ideal actuators and sensors. Within this context, a two-stage
design procedure is proposed: firstly, design and/or analysis of the
numerical and physical subsystem interconnection as if the transfer
system were not present; and secondly removal of as much as possible
of the transfer system dynamics while having regard for the
stability margins established in the first stage. The approach
allows the use of engineering insight backed up by well-established
control theory; a number of possibilities for each stage are given.
The approach is illustrated using two laboratory systems: an
experimental mass-spring-damper substructured system and swing up
and hold control of an inverted pendulum. Experimental results are
provided in the latter case.
}
}
@article{GawVirNeiWag07,
author = {Gawthrop, P. J.
and Virden, D. W.
and Neild, S. A.
and Wagg, D. J.},
title = {Emulator-based control for actuator-based hardware-in-the-loop testing},
year = {2008},
journal = {Control Engineering Practice},
volume = 16,
number = 8,
pages = {897-908},
keyword = {Hardware-in-the-loop},
keyword = {Feedback control},
keyword = {Robustness},
keyword = {Automotive engineering},
doi = {10.1016/j.conengprac.2007.10.009},
note = {Available online 3 December 2007},
abstract = {Hardware-in-the-loop (HWiL) is a form of component testing where hardware components are linked with software models. In order to test mechanical components an additional transfer system is required to link the software and hardware subsystems. The transfer system typically comprises sensors and actuators and the dynamic effects of these components need to be eliminated to give accurate results. In this paper an emulator-based control strategy is presented for actuator-based HWiL. Emulator-based control can solve the twin problems of stability and fidelity caused by the unwanted transfer system (actuator) dynamics. Significantly EBC can emulate the inverse of a transfer system which is not causally invertible, allowing a wider range of more complex transfer systems to be controlled. A robustness analysis is given and experimental results presented.}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2008 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2009 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{GawBhiMoh09,
title = {Physical-model-based control of a piezoelectric tube for nano-scale positioning applications},
journal = {Mechatronics},
volume = 20,
number = 1,
pages = {74 - 84},
month = {February},
year = 2010,
issn = {0957-4158},
doi = {10.1016/j.mechatronics.2009.09.006},
author = {P.J. Gawthrop and B. Bhikkaji and S.O.R. Moheimani},
keywords = {Flexible structures},
keywords = {Piezoelectric transducers},
keywords = {Charge control},
keywords = {Vibration control},
keywords = {Bond graphs},
keywords = {Physical-model-based control},
abstract = {
Piezoelectric tubes exhibit a highly resonant mode of vibration which, if uncontrolled, limits the maximum scan rate in nano-scale positioning applications. Highly resonant systems with collocated sensor/actuator are often controlled using resonant shunt dampers. Unfortunately, in the configuration used here, this approach is not possible due the non-minimum phase property arising from the presence of a right-half plane zero.
This problem is solved by: (i) interpreting the resonant shunt damper in the context of physical-model-based control (PMBC) and (ii) extending the PMBC approach to handle non-minimum phase systems.
The resultant controller combines the physical insight of the resonant shunt damper with the ability to control the non-minimum phase piezoelectric tube.
A digital implementation of the controller was experimentally evaluated and found to successfully eliminate the resonant mode of vibration during an accurate and fast scan using a piezoelectric tube actuator.},
note = {Available online 13 October 2009}
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2010 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2011 }}
@comment{{This is the file that should be edited to add CSC publications}}
@incollection{GawRiz11,
author = {Gawthrop, P.J. and Rizwi, F.},
affiliation = {School of Engineering, University of Glasgow, Scotland, UK},
title = {Coaxially Coupled Inverted Pendula: Bond Graph-Based Modelling, Design and Control},
booktitle = {Bond Graph Modelling of Engineering Systems},
editor = {Borutzky, Wolfgang},
publisher = {Springer New York},
isbn = {978-1-4419-9368-7},
keyword = {Engineering},
pages = {179-194},
doi = {10.1007/978-1-4419-9368-7_5},
abstract = {A bond graph method is used to examine qualitative aspects of a class of unstable under-actuated mechanical systems. It is shown that torque actuation leads to an unstabilisable system, whereas velocity actuation gives a controllable system which has, however, a right-half plane zero. The fundamental limitations theory of feedback control when a system has a right-half plane zero and a right-half plane pole is used to evaluate the desirable physical properties of coaxially coupled inverted pendula. An experimental system which approximates such a system is used to illustrate and validate the approach.},
year = 2011
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2012 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2013 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2014 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2015 }}
@comment{{This is the file that should be edited to add CSC publications}}
@article{GawNeiWag15,
author = {Gawthrop, Peter and Neild, S.A. and Wagg, D.J.},
title = {Dynamically dual vibration absorbers: a bond graph approach to vibration control},
journal = {Systems Science and Control Engineering},
volume = 3,
number = 1,
pages = {113-128},
year = 2015,
doi = {10.1080/21642583.2014.991458},
abstract = { This paper investigates the use of an actuator and sensor pair coupled via a control system to damp out oscillations in resonant mechanical systems. Specifically the designs emulate passive control strategies, resulting in controller dynamics that resemble a physical system. Here, the use of the novel dynamically dual approach is proposed to design the vibration absorbers to be implemented as the controller dynamics; this gives rise to the dynamically dual vibration absorber (DDVA). It is shown that the method is a natural generalisation of the classical single-degree of freedom mass–spring–damper vibration absorber and also of the popular acceleration feedback controller. This generalisation is applicable to the vibration control of arbitrarily complex resonant dynamical systems. It is further shown that the DDVA approach is analogous to the hybrid numerical-experimental testing technique known as substructuring. This analogy enables methods and results, such as robustness to sensor/actuator dynamics, to be applied to dynamically dual vibration absorbers. Illustrative experiments using both a hinged rigid beam and a flexible cantilever beam are presented. }
}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2016 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2017 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2018 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2019 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2020 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2021 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2022 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of publications by CSC in 2022 }}
@comment{{This is the file that should be edited to add CSC publications}}
@comment{{-*-bibtex-*- used to set EMACS into bibtex-mode}}
@comment{{Database of Papers Produced by members of the Glasgow University
Control Group}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of software }}
@comment{{This is the file that should be edited to add software}}
@comment{{-*-bibtex-*- used to set EMACS into bibtex-mode}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in }}
@comment{{This contains pre 1960 publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1868 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1869 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1869 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1907 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in }}
@comment{{This contains pre 1960 publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1932 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1932 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1934 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1936 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1940 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1947 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1948 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1952 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1953 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1954 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1955 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1956 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1956 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1958 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1960 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1961 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1962 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1963 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1964 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1965 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1966 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1967 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1968 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1969 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1970 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1971 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1972 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1973 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1974 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1975 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1976 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1977 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1978 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1979 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1980 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1981 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1982 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1983 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1984 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1985 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1986 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1987 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1988 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1989 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1990 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1991 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1992 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1993 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1994 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1995 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1996 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1997 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1998 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 1999 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2000 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2001 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2002 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2003 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2004 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2005 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2006 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2007 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2008 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2009 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2010 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2011 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2012 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2013 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2014 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2015 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2016 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2017 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2018 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2019 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2018 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2020 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2021 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2022 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set Emacs into bibtex-mode}}
@comment{{Database of non-CSC publications in 2023 }}
@comment{{This is the file that should be edited to add non-CSC publications}}
@comment{{-*-bibtex-*- used to set EMACS into bibtex-mode}}
@comment{{Cross References for Conferences MUST go in footers}}
This file was generated by bibtex2html 1.99.